Application
1. Hazardous:division 1&2
2. Explosive gas atmosphere: II A, II B;
3. Indoor and outdoor (IP65)
Structure description
1. Enclosure is cast with aluminium alloy, surface is sprayed with plastic, fine outline, enclosure can also be CS or SS, argon protected welding.
2. With good water and dust proof functions.
3. Main structure, it is assembled according to requirement.
4. Built-in switch, button, indicator light and meter.
5. Range of meter will be confirmed by customer.
6. Wiring with steel tube or cable.
Main technical parameters
| Rated Voltage (V) | Rated current (A) | Ex-mark | Erosion-proof class | Degree of protection | Inlet thread (G) | Cable outer dia.(mm) |
| AC380/220 DC48/36/24 | 6, 10, 16 | Exed II CT6 | WF1 | IP66 | M16~M50 | Φ8~Φ32 |
| G1/2~G1 1/2 | Φ8~Φ30 |
Meaning of button
Indicator codeControl button (with lamp) code Switch code Example Outline & installation dimensions
| Operation head | H(mm) | Operation head | H(mm) |
| Frame | 11 | Button with lamp | 18 |
| Rubber button | 18 | Potentiometer | 19/27 |
| Bi-button | 18 | Control switch 1# | 29 |
| Emergency button with self lock | 34 | Control switch 2# | 32 |
| Mushroom head button | 30 | Control switch 3# | 32 |
| Signal lamp | 18 | Control switch 4# | 33 |
Brief introduction about the combination of TY8009 switchBrief introduction of switch combination symbol.
Copyright © Yueqing Sanhui Explosion-proof Electric Co., Ltd. All Rights Reserved |
Sitemap
Technical Support: 
