• +86 151 5875 5610
  • sh1@sanhuiex-electric.com
  • Get a Quote

    • Home > News

    Why did the junction box wear out?
    Why did the junction box wear out? After the new Armored Cable Glands are used for a long time, the inner and outer table of each ring will wear normally, and the circular arc of the inner and outer table is still the same as the outer circle of the piston rod, only the central part of each section wears more, and the two ends wear less,
    View More May. 18, 2019
    [Armored Cable Gland Supplier China]Analysis of leakage mechanism of cable stuffing box
    [Armored Cable Gland Supplier China]Analysis of leakage mechanism of cable stuffing box Armored Cable Gland leakage, can be directly observed from the outside of the funnel, the following two aspects are analyzed:
    View More May. 14, 2019
    Management measures for valve stuffing box leakage
    Management measures for valve stuffing box leakage Explosion Proof Cable Gland Supplier shares that valve stuffing box leakage is due to packing or packing ran out of the media can not be sealed. Valve stuffing box with pressure plugging is aimed at this leakage and take no parking, no pressure relief measures to make up for the packing, of course, the packing made up and the original packing is di
    View More May. 10, 2019
    Why Did The Explosion Proof Cable Gland Wear Out?
    Why Did The Explosion Proof Cable Gland Wear Out? About the new Industrial Cable Gland spare parts, ring of the table in the table of the circle and the piston ring of the same circle, and the center of the table in the circle of the same point, that is, the radial width of the same. The outer surface has a tension ring, so that the internal surface of the force uniform.
    View More May. 07, 2019
    Explosion-proof armored cable clamps tight seal joint
    Explosion-proof armored cable clamps tight seal joint Explosion Proof Cable clamping tight sealing joint, which is installed in the connection of cable and electrical equipment, and plays the role of introducing cable, fixing position, sealing and flame-proof.
    View More Apr. 29, 2019
    Installation guide for explosion proof cable seal joints
    Installation guide for explosion proof cable seal joints Following shared by Explosion Proof Cable Gland Manufacturer. 1. The size of the thin wall hole is recommended to be + 0.2-0.3mm of the outer diameter of the thread of the cable sealing joint.2. When the thickness of the thin wall is less than 1.5mm, it is recommended to use two nuts, or change the type 0 sealing ring into a flat washer.
    View More Apr. 22, 2019
    Previous 1 2 3 4 5 6 ... 19 20 Next
    hot Products
    PRODUCTS

    contanct us
    E-mail Us

    Copyright © Yueqing Sanhui Explosion-proof Electric Co., Ltd. All Rights Reserved | Sitemap  

      Technical Support: