Home > News

What Should You Pay Attention To When Using LED Explosion-proof Lamps?

Dec. 11, 2018

1. LED Explosion Proof Stainless Steel Light should pay attention to regularly clean the dust and dirt on the lamp housing, keep the casing clean, improve the light efficiency and heat dissipation performance of the lamp, and the cleaning method changes according to the protective ability of the lamp housing.

2. Check whether the transparent parts have been damaged by foreign objects, and whether the protection net is loose, desoldered or corroded. If it is, stop using it and repair and replace it in time.

3. If there is accumulated water in the lamp cavity of the lamp used in the humid environment, it should be removed in time, and the sealing parts should be replaced to ensure the protective performance of the casing.

4. In the maintenance of lamps, the following points should be checked by China Explosion Proof Lamp Supplier after opening the cover: 1. Whether the flameproof joint surface is intact 2. Whether the rubber seal is hard or sticky 3. Whether the wire insulation layer is green and carbonized 4. Insulation and electrical Whether the component has deformation and scorch marks. If the above problems occur, they should be repaired and replaced in time.

5, LED explosion-proof lights before installation, should be checked from the nameplate and product specifications: explosion-proof type, category, level, group; the degree of protection of the shell; installation methods and fastener requirements for installation. The installation of the explosion-proof lamp should ensure that the fixing is firm, the fastening bolts must not be replaced arbitrarily, and the spring washers should be complete.

6. Check whether the transparent parts have been damaged by foreign objects, and whether the protection net is loose, desoldered or corroded. If it is, stop using it and repair and replace it in time.

7. When opening the lamp cover, follow the warning card requirements, and open the cover after disconnecting the power supply.

LED Explosion Proof Stainless Steel Light